Using your Telus remote as a universal control device is a straightforward process. You can program various Telus remote models to operate your Sharp TV by inputting specific codes. Whether you’re working with the Telus Classic Remote, Slimline Remote, Satellite, or Digital Box Remote, all of them can be configured to control your Sharp TV efficiently. Read this article to learn programming procedures for pairing a Telus Remote with Sharp TV.
How to Program Telus Remote to Sharp TV
The Telus remote models are of different types. So, the programming steps may vary concerning each model. As a prerequisite, turn on your Sharp TV and insert fresh batteries into the Telus remote.
Telus Digital Box Remote with Sharp TV
Connect the Sharp TV & the Telus Digital box and turn on both devices.
1. Open the Telus box Settings and choose Devices Settings.
2. Click Remote & Accessories and tap on Program Remote with TV.
3. Complete the pairing procedures by following the on-screen instructions.
Manual Code Entry
1. Tap and hold the OK button on the Telus Digital Box Remote until the green light flashes twice.
2. Type in the remote code using the number pad on your remote. The green light will blink twice and then go off.
- Codes: 017, 011, 187, 213, 214, 326
3. Test the pairing by adjusting the volume or switching channels. If your Sharp TV responds, the setup was successful. If not, try another code until the remote pairs with the Sharp TV.
Telus Slimline 2 Remote to Sharp TV
As a prerequisite, power on the Telus digital box and set its volume to 25.
1. On the Telus Slimline 2 remote, hold the Options key and release it when the indicator light near the Optik button blinks green. This means the remote is ready to be programmed.
2. Use the number pad on the Slimline 2 remote and enter the 4-digit remote code. The light near the Power button on the Sharp TV will blink twice after the correct code is entered.
- Codes: 1179, 1730, 1402, 1746, 1638, 1376, 1301, 1927, 1375, 1932, 1720, 1669
3. Hold the Power button on the Slimline 2 remote. If the Sharp TV turns off, that means the code was entered correctly. Release the Power button and press OK to save the settings.
4. Press the Power button again to turn the TV back on. The pairing process is now complete, and your Telus Slimline 2 remote should be controlling your Sharp TV.
Tip: If you can’t find the correct code, long-click the Options button and release it when the remote’s Green light near Optik button flashes 2 times. Type 0029, and the remote will start to search the code for your TV. When the TV light flashes, press OK to finish the process.
Telus Slimline Remote 1 to Sharp TV
Follow these steps to program the Telus Slimline remote to your Sharp TV:
1. Long-click the Mode button and release it when the red light on the remote blinks.
2. Hold the Options key until the red light blinks twice.
3. Type the remote code using the number pad. The TV key will flash twice if the code is correct.
- Codes: 1181, 1176, 1434, 1175, 1903, 1178, 1174, 1177, 1698, 1699, 1402, 1400, 1179, 1818, 1399, 1824, 1680, 1639
4. Long-click the Power button until your TV turns off, indicating a successful pairing.
5. Press the OK button, and the TV light will blink red twice.
6. Hold the Mode button. Let go of the button when the remote’s Green OPTIK button lights up. This will power off your Sharp TV.
7. Finally, hit the TV Power button, and your TV will turn on.
Tip: If the above doesn’t work, hold the Mode button and release it when the remote’s TV button blinks twice. Type the code 29, and the remote will try to find the matching code for your Sharp TV. When the TV light flashes, press the OK button.
Telus Classic Remote
If you have the Telus Classic Remote, follow these easy steps to pair it with your Sharp TV:
1. Hold down both the TV and OK buttons simultaneously for a few seconds.
2. Release both the buttons, and the remote’s red light will flash twice to indicate it’s in programming mode.
3. Use the number pad on your Telus Classic Remote and enter the appropriate TV remote code.
- Codes: 1181, 1176, 1434, 1175, 1903, 1178, 1174, 1177, 1698, 1699, 1402, 1400, 1179, 1818, 1399, 1824, 1680, 1639
4. Press the Power button to see if your Sharp TV turns off. If successful, the remote is paired!
Note: If the TV doesn’t turn off after entering the code, repeat the steps with a different code until you find the correct one.
Telus Satellite Remote
1. Long-click the TV button until all mode buttons (TV, SAT, AUX, VCR) light up, then release. The TV button will start flashing.
2. Hit the Power button. The TV button will stay lit.
3. Tap the Up arrow button repeatedly until the TV turns off.
4. Once off, hit the Pound (#) button to save the code. You can see the TV button blinking three times if successful.
FAQ
You cannot program the remote if the TV s partially turned on, insufficient remote batteries, remote signal intefernces, or wrong remote code.
